+86 136-0027-6057

Navigation

Service Hotline: +86-769-8672 8456

CNC Deep Hole Drilling Machine TL-1100

    FEATURES:Integrated base structure, good stability, simple operation, reasonable layout, mold and convenientassembly and disassembly, wide application, suitable for the majority of mold processing.

    PROCESSING RANGE:It is applicable for deep hole working of various types of workpiecemoulds(including water pores, hot runners, centre holes, guide posholes, and ejector sleeve holes), automobile parts, bent axle levershydraulic pipes, etc.

    Consulting>
Details
 TL-1100.jpg

FEATURES:

(1)Cast iron is tempered for stress relief to ensure structural stabilitywithout deformation

(2)High rigidity and precision ballscrew on three axis, providingpowerful torsion and improving the durability

(3)High-quality linear guideway on three axis allow very high speedsand high table load capacity ensure maximum accuracy anddurability.

(4)AC servo motor are directly connected with ballscrew to allowstable transmission without any back lash, and greatly improvesthe dynamic rigidity of tranmission and rapid feed.

(5)Powerful spindle servo motor to satisfy processing at high or lowspeedAuto oil cooling system to ensure the constant temperature duringmachining.

(6)The integrated design of castings, oil tanks and sheet metal completelysolves the common oil leakage problem of deep hole drills.

PROCESSING RANGE:

It is applicable for deep hole working of various types of workpiecemoulds(including water pores, hot runners, centre holes, guide postholes, and ejector sleeve holes), automobile parts, bent axle levershydraulic pipes, etc.

The deep hole drill differs from the traditional hole making methodsand by specific drilling technology and one-pass, can achieve suchadvantages as precise machining effect, accurate hole site, gooddimensional accuracy, high straightness and coaxiality, very highsurface smoothness and repeatability.

Convenience for processing various deep holes, better solution forsuch various specific deep holes as cross holes, inclined holes,blind holes, and flat blind holes, advanced and efficient hole makingtechnology, and high processing precision, efficiency and consistency.

PARAMETER TABLE:

TL-1000 Standard Specification

Specifications

Project

Company

TL-1000

Spindle taper

model

/

BT40

Trip

X-axis stroke (left and right)

mm

1100

Y-axis stroke (up and down)

mm

1100

Z-axis stroke (front and rear)

mm

1000

Processing range

Limit drilling depth

mm

1000

Borehole diameter

mm

2.5-35

Drilling feed rate

mm/min

10-250

Machining accuracy

Borehole diameter deviation

mm

≤0.02

Borehole straight-line deviation

mm

0.5mm/1000mm

Drilling surface roughness

um

Ra≤3.2

Workbench

Table size

mm

1250X950

Limit load of workbench

KG

6000

Number of T-grooves

/

6

T-groove specification

mm

22

Principal axis

Spindle motor power

KW

11

Spindle speed (stepless)

rpm

7000

Electric machinery

X-axis AC servo motor

KW

3

Y-axis AC servo motor

KW

2

Z-axis AC servo motor

KW

1.5

Cutting oil device

Cutting oil pump power

HP

10

Cutting oil pump pressure

kg/cm²

100

Cutting oil tank capacity

L

700

Constant temperature oil cooler power

KW

3

Other

Net weight of machine tool

KG

8500

Overall power

KW

26

Machine tool dimensions

mm

4900X3200X2700

Statement: The technical parameter scheme of this configuration will be slightly different due to continuous improvement in R&D, and the actual parameters of the delivery shall prevail!